To order a kit please send an email to PT-19 to:

 

Kit features and will include the following:
 
  • Hand selected AAA grade 4-6 lb. & other light weight balsa

  • Semi shaped hand cut 4-6 lb. Contest balsa block

  • Laser cut balsa and plywood parts

  • CAD drawn full size plans

  • C-tube built-up balsa wing construction (C-tube with sheer webbing)

  • Construction highlights with photos

  • Maple motor mounts

  • Pre-bent 1/8th wire landing gear

  • 2 Custom molded windshields with frame (no more bending plastic)

  • Adjustable lead-out guide

  • Adjustable weight box

  • Crutch type nose construction

Kit features a simplified internal modern day construction with a slightly wider fuse to fit a modern tank allowable by AMA & PAMPA rules to make this a much easier and better model to build when compared to the Original kit or plans. Also featuring, laser cut ribs with tabs for easier bench top building.

Kit cost is $199.99 + $15.00 S & H. in the U.S.A.
(For out of country postage send exact mailing address, International charges will apply)
Due to the increase in shipping rates; shipping charges may differ at time of sale

Hardware, Graphics and Control System "NOT" included.
 
 Send Confirmation email  to: builtrightflyright@builtrightflyright.comPT-19
 
Short kit coming soon! - Send email for availability
Wingspan: 54 1/4 inch Wing Area: 550 Sq. in. 
length: 36 1/2" Engine Size: .35 -.46
see Dave's original

Click here to view the PT-19 prototype building photos

 
Copyright 2001-2015 builtrightflyright.com , builtrightflyright.com
all rights reserved, site designed, built and maintained by builtrightflyright.com

Hit Counter