Designed by: Bill Werwage

Designed in 1968

W.A.: 709.40  |  W.S.: 61.72" Eng: .40-.60  |  Length: 43.10"
AutoCAD Plans by: Walter Umland
The USA- 1 is an I-Beam wing model designed in 1968 by Bill Werwage. The USA-1 is a Classic legal stunter.
The kit will include all laser cut balsa and birch plywood parts, pre bent landing gear, a molded canopy, etc
Kits will also have all light weight balsa, contest balsa blocks and birch plywood and more.
hardware and controls are not included.


Photos shown were found on the internet.

2017 Kit price is: $275.00 plus shipping (see below).
Shipping on all International orders will vary from Country to Country.
For information about the USA-1 kit; please send all emails to:

please use this option to make a purchase


USA-1 kit (1/12/2017)

PayPal Acceptance Mark
Click here and take a look at the kit prototype under construction

Thank you for looking

Background photo provided by Bob McDonald

Copyright 2001-2016 ,
all rights reserved, site designed, built and maintained by