profile
gieseke nobler
Prototype built, painted and finished by Russ Main of Acworth, Ga.
“Profile Gieseke Nobler” kits are now available upon request...

 

The Profile Gieseke Nobler is a flapped Profile model that was adapted from Bob gieseke's championship nobler.

 

AutoCAD drawings completed back in march of 2003 by: watt Moore,  wing span 50 in. with a 37” fuselage and a 50" wingspan with 510 sq. in. of wing area and requires a .35-.40 engine.

 

The Profile Gieseke Nobler kit will include 100% laser cut balsa and plywood parts. The kit includes one - 2 piece pre-bent wire landing gear and CAD drawn plans started by Watt Moore in 2000 and finished in 2003. The ribs will include building tabs on them so a wing jig is not required to assemble.

 

our new “Profile Gieseke Nobler kit originally started out as a personal desire to make a Profile Gieseke Nobler by the late John Lowry. Before John's passing John worked with Watt Moore and also the late Allen Brickhaus'  to bring forth this very nice profile G. Nobler. Sadly John Lowry was never able to finalize or release the kit due to his passing from cancer.

 

This new release “Profile Gieseke Nobler” is expected to be every bit as good as any other precision aerobatic profile stunter with the added benefit of looking like the original G. Nobler .

 

ourProfile Gieseke Nobler is a new kit resembling the famous Gieseke Nobler

and is being offered in memory and in Honor of Bob Gieseke.

 
Kit price is $160.00 (each) plus S&H.
The kit does not include any hardware, decals or wheel pants.
Add balsa wheel pants for as low as $15.00 with kit.
Wheel pant mounts also available
(Prices below include all shipping and PayPal cost/fees in the drop down box below)
International shipping to Canada and All other countries to be shipped 1st class U.S. Mail.
(All fees are included in the total below)
All kits are made after payment has been received.
Control system, hardware, covering, glue, motor, wheels, wheel pants, etc., are NOT included. Custom control systems can be ordered directly from Russ Honea.

Kit orders are Gladly accepted Pay with PayPal

All orders are to be emailed to: builtrightflyright@builtrightflyright.com

 

Kit Ordering

 

Shipment Destination Options includes all additional fees

 

Wheel Pant Ordering

 

Balsa Wheel Pants includes additional fees & shipping cost offset

PayPal Acceptance Mark

click here to see prototype building photos
Copyright© 2001-2016-2019 builtrightflyright.com Ô, builtrightflyright.com Ô
all rights reserved, site designed, built and maintained by builtrightflyright.com Ô 

¬  Back Page | Prototype Page  ®

Hit Counter

Kit Pg.