*UPDATE*  We are taking orders for the Fancherized Twister kits, so feel free to send us an email to order your kit today...

Fancherized Twister

by Ted Fancher


Our friend Rusty built this Fancherized Twister from our kit


The  “Fancherized Twister” is a kit bashed Profile stunter designed by Ted Fancher.



 The “Fancherized Twister” is a flapped Profile model with a 34.50” fuselage and a 48.50" wingspan with 490 sq. in. of wing area and requires a .25-.40 engine. The “Fancherized Twister” kit will include 100% laser cut balsa and plywood parts.  The kit includes a 2 piece pre-bent split wire landing gear and CAD drawn plans. The ribs will include building tabs on them so a wing jig is not required for assemble.


Kit price is: $185.00 plus S&H (depends on your location)
International shipping fees will be applied.
Shipping rates are estimated and may increase at time of actual shipment..


 our“Fancherized Twister” kit is NOT a copy of the Sig Twister kit and then you do the kit bash mod's. our "Fancherized Twister” kit is a new kit authorized and approved by Ted Fancher of his finished model of the Fancherized Twister”.


Hardware "NOT" included. 

Please allow 2-3 weeks for kit to be made after payment has arrived.


All orders are to be emailed to: builtrightflyright@builtrightflyright.com

Kit will include some light weight contest- medium weight balsa.

Please pay below with PayPal

Please contact us at: builtrightflyright@builtrightflyright.com for payment details

PayPal Acceptance Mark

with the constant increases in shipping prices we reserve the right to request

additional funds if the actual shipping amount is greater than estimated here

* Updated 02/11/2020 * Kits are available upon request.
Copyright© 2001-2016-2020 builtrightflyright.com Ô, builtrightflyright.com Ô
all rights reserved, site designed, built and maintained by builtrightflyright.com

Hit Counter